Capturing the experimental behaviour of a point-absorber WEC by simplified numerical models

The paper presents a wave basin experiment of a direct-driven point-absorber wave energy converter moving in six degrees of freedom. The goal of the work is to study the dynamics and energy absorption of the wave energy converter, and to verify under which conditions numerical models restricted to heave can capture the behaviour of a point-absorber moving in six degrees of freedom. Several regular and irregular long-crested waves and different damping values of the power take-off system have been tested. We collected data in terms of power output, device motion in six degrees of freedom and wave elevation at different points of the wave basin. A single-body numerical model in the frequency domain and a two-body model in the time domain are used in the study. Motion instabilities due to parametric resonance observed during the experiments are discussed and analysis of the buoy motion in terms of the Mathieu instability is also presented. Our results show that the simplified models can reproduce the body dynamics of the studied converter as long as the transverse non-linear instabilities are not excited, which typically is the case in irregular waves. The performance of the more complex time domain model is able to reproduce both the buoy and PTO dynamics, while the simpler frequency domain model can only reproduce the PTO dynamics for specific cases. Finally, we show that the two-body dynamics of the studied wave energy converter affects the power absorption significantly, and that common assumptions in the numerical models, such as stiff mooring line or that the float moves only in heave, may lead to incorrect predictions for certain sea states.     

Accurate theoretical prediction of optical properties of BODIPY dyes

Boron-dipyrromethene dyes (BODIPY) are of great interest nowadays mostly due to their valuable optical properties. Nevertheless, no systematic research of the optical property dependence on the structure of dyes has been performed yet. In this work, analysis of the available quantum-chemical methods for BODIPY optical property calculations has been carried out. The accuracy of eight DFT functionals has been studied. The solvation effects upon excitation have been considered within two schemes. The methods that predict the absorption and emission spectra of BODIPY derivatives with high accuracy have been proposed. Using the suggested methods, the influence of nature of substituents and their position in the BODIPY core on the optical spectra of the dyes has been studied. A complex pattern of red- and blue-shifts in optical spectra in dependence of nature and position of substituents has been revealed. The results of this work provide the way for efficient design of BODIPY derivatives with desired optical properties.     

La掺杂和空位对ZnS磁性和光学性能影响的第一性原理研究

利用密度泛函理论框架下的平面波超软赝势法,通过第一性原理对La掺杂与Zn空位(V_(Zn))及La掺杂与S空位(V_S)共存的ZnS体系的电子结构、磁性机理、形成能及吸收光谱进行了研究.结果表明, La掺杂与空位(V_(Zn)或V_S)的空间位置最近时,掺杂体系的形成能最低,体系最稳定.另外,La掺杂与Zn空位共存时,体系具有磁性,且体系的净磁矩与La原子与Zn空位的相对位置有关;La掺杂与S空位共存时,掺杂体系无磁性,但此时体系的禁带宽度最窄且吸收光谱红移最显著.     

Pattern formation in a variable diffusion predator–prey model with additive Allee effect

This paper deals with a variable diffusion predator–prey model with additive Allee effect. A good understanding of the existence of steady states is gained for the case  $\sigma =0$. The result shows that the reduce problem has multiple solutions. Moreover, by applying the singular perturbation method, we give a proof of existence of large amplitude solutions when  $\sigma$ is sufficiently small.     

强度解调型光纤光栅温度传感实验

光纤光栅在工程上应用广泛,但由于存在解调系统复杂、成本高,尤其是需要使用光纤光谱仪等波长解调仪器,使得光纤光栅很难走入本科教学的实验课堂.本文提出了一种基于窄线宽DFB激光器的强度解调方案,极大地简化了光纤光栅传感器的解调系统,完全满足较高分辨率和实时检测的系统要求.合理安排的温度传感实验可以非常直观地展示光纤光栅的线性传感性能,使得工程化的光纤光栅传感技术轻松走进本科教学课堂,具有极高的推广和应用潜力.     

水下对转螺旋桨流致辐射噪声机理与预报方法*

水下对转螺旋桨流致辐射噪声的预报对于水下目标的特征提取和分类识别具有重要意义。由桨叶的旋转引起的湍流场是水下对转螺旋桨流致辐射噪声的源场。分述了水下对转螺旋桨湍流边界层脉动、旋转干涉效应和空化效应引发的水动力噪声机制和研究进展,比较了目前工程应用中的3种对转螺旋桨流致辐射噪声预报方法的特点。在分析对转螺旋桨流致辐射噪声数值预报难点的基础上,综述了对转螺旋桨流致辐射噪声计算方法的研究进展,指出间接数值模拟方法是工程中进行对转螺旋桨流致辐射噪声预报的有效方法。     

曲面相机阵列多分辨成像方法

针对现有成像系统因数据冗余而无法兼顾大视场、高分辨、高效性的问题,结合人眼视网膜变分辨成像和并列式复眼成像原理,设计一种多分辨率成像的复合仿生成像系统.该成像系统按照球面和平面兼顾的曲面布局方式,利用11个相机镜头构建相机阵列,组成了四个等级分辨率的子眼拍摄模块.通过物距100 m的远景实验和物距10 m的近景实验发现,该系统在实现高分辨成像的同时,获得总视场达150.8°×37.8°.多分辨率成像实验结果表明,该系统获取的图像的分辨率从中心视场到边缘视场逐渐降低,并且相较于中心清晰全视场成像,四级分辨率成像的拼接图像数据量减少了17.2倍的数据冗余.     

考虑地表反射类型的气溶胶散射偏振特性

采用逐次阶散射法求解矢量辐射传输方程来研究气溶胶在不同地表反射模型下的散射偏振特性.首先,选取单一地表反射模型和耦合地表反射模型两种地表反射模型.然后,根据地表反射模型计算得到相应的地表反射率,进而采用逐次阶散射法对矢量辐射传输方程进行求解,得到散射光的Stokes矢量.最后,由Stokes矢量计算得出散射光的偏振度.仿真结果表明,两种地表反射模型下气溶胶单次散射的散射辐射强度和线偏振度均相等;耦合地表反射模型的总散射辐射强度和线偏振度总是大于单一地表反射模型;单一地表反射模型的气溶胶单次散射相对总散射的贡献总是大于耦合地表反射模型.研究结果对气溶胶光学特性的反演具有一定意义.